Epoxy vs Polyaspartic Garage Floor Coating Cost Comparison

In 2026, professional 100% solids epoxy coating for a 2-car garage (450 sq ft) costs between $2,250 and $3,600 ($5 to $8 per sq ft). Polyaspartic coatings cost between $3,150 and $4,950 ($7 to $11 per sq ft). DIY epoxy kits cost $350 to $700, while DIY polyaspartic materials cost $800 to $1,400. Polyaspartic cures in 24 hours and never yellows from UV exposure, whereas epoxy takes 3 to 7 days to fully cure and can amber in direct sunlight.

Glossy seamless polyaspartic garage floor coating reflecting workshop ceiling LED lights

Published 2026-03-01 · Updated 2026-03-01 · 10 min read

Chemical Composition and Performance Attributes

Epoxy is a thermosetting resin created by mixing epoxide base resins with polyamine hardeners. It forms a thick, dense mechanical bond with concrete. Polyaspartic is an aliphatic polyurea coating developed for rapid industrial turnaround.

Polyaspartic offers 4x greater abrasion resistance than epoxy, remains flexible under thermal shock, and is 100% UV stable. However, epoxy self-levels more forgivingly on rough, pitted concrete slabs.

Itemized 2-Car Garage Cost Breakdown

A standard 20×22 ft (440 sq ft) 2-car garage requires concrete diamond grinding, moisture vapor barrier primer, base color coat with full chip broadcast, and a clear protective topcoat.

Worked Example: 440 Sq Ft Garage Floor System (Full Broadcast Flake)

Installing a professional 3-coat polyaspartic system over a 440 sq ft slab with crack repairs.

Doing this project DIY with professional-grade polyaspartic saves $2,335 compared to average contractor pricing of $3,520.

Can I put polyaspartic over existing epoxy?

Yes, if the existing epoxy is tightly bonded, mechanically scuffed with 80-grit sandpaper, and thoroughly degreased.

Related calculators

Related articles

Sources